Noticed in the L99's bin, the shift time tables are all zero except for the 1 -> 2 shift column. Does any one know if the 0's are really that, or does that just then default to the value of the previous populated column. (in the L99's case, it would have the same for all three shifts)

For reference, the 9c1, ss and caddy v4p(IIRC) had non zero values in the 1->2 and 2->3 columns, but then zero's for the 3->4 column.


On a side note, it seems the downshift columns are what make the L99 feel like a slug. When i compared them to the points a bauman control offers as default, I could see why (use one on my mustang).

The up / down shift points are much closer for each %TPS value. Where as in the stock bins, once it up shifts, it takes nearly WOT to get it to down shift again. I adopted the bauman points and feels like it's almost 500 pounds lighter in driving around town. It's upshifts are a little higher and it downshifts more readily.