2003 4.8 6.0 5 speed bin file

[2xls1]

I don't have a 03 4.8L file at this time. Here is a 04 and two 05s. Only difference between them is the rear gear ratio. One has 3.23 and the other is 3.73. That doesn't effect much on a M5 calibration other than the speedometer calibration. That would effect a lot more on an A4 calibration.

[bobcratchet555]

I don't have a 03 4.8L file at this time. Here is a 04 and two 05s. Only difference between them is the rear gear ratio. One has 3.23 and the other is 3.73. That doesn't effect much on a M5 calibration other than the speedometer calibration. That would effect a lot more on an A4 calibration.

thank you, exactly what i was looking for!

[silvernajd]

[bobcratchet555]

I don't have a 03 4.8L file at this time. Here is a 04 and two 05s. Only difference between them is the rear gear ratio. One has 3.23 and the other is 3.73. That doesn't effect much on a M5 calibration other than the speedometer calibration. That would effect a lot more on an A4 calibration.

figured i would ask....do you by chance have a 4.8 manual tune from a 2006? thank you

[2xls1]

Be aware that 06-07 Classic calibrations are not compatible with 03-05 ETC hardware and vice versa.

[bobcratchet555]

Be aware that 06-07 Classic calibrations are not compatible with 03-05 ETC hardware and vice versa.

thank you so much, that is precisely why i need this file!! :)

[bobcratchet555]

I don't have a 03 4.8L file at this time. Here is a 04 and two 05s. Only difference between them is the rear gear ratio. One has 3.23 and the other is 3.73. That doesn't effect much on a M5 calibration other than the speedometer calibration. That would effect a lot more on an A4 calibration.

i will once again ask for a miracle, do you by chance have a 4.8/manual tune from a 1999 OS and/or 2000 OS? thank you kind sir.

[2xls1]

Sorry I don't. The only ones I have in those years are 4.3L V6 M5s. Closest I would have to either of those would be a 01 6.0L M5.

[bobcratchet555]

Sorry I don't. The only ones I have in those years are 4.3L V6 M5s. Closest I would have to either of those would be a 01 6.0L M5.

thanks for looking! if i end up finding one, i will post it.

[2xls1]

I found a 02 48 M5 calibration which would be a P01 PCM and would be preferable to a 99 or 00 calibration for many reasons if it is for a swap. It is in HPT format so I would have to flash it to a PCM and then read it back out as a bin if that would work.