Can a 6395 ECM run a MAF system?

[dave w]

Hi Dave,
Can you give me a list of the mods that this BIN is for?
Also was the engine using a TBI or was it converted to MPFI?
Thanks

Are you going with the MPFI conversion?

Are you going to stick with the TBI?

The .bin in post #8 is MPFI. The .zip file in post #2 outlines EVERYTHING needed for MPFI.

dave w

[94TBI]

Are you going with the MPFI conversion?

Are you going to stick with the TBI?

The .bin in post #8 is MPFI. The .zip file in post #2 outlines EVERYTHING needed for MPFI.

dave w

I was planning on trying the TBI first then deciding if I wanted to go the MPFI route.
I was also curious about the engine particulars that the BIN was tuned for.......such as heads, cam etc.
Just want to have as much info as possible.

[dave w]

I was planning on trying the TBI first then deciding if I wanted to go the MPFI route.
I was also curious about the engine particulars that the BIN was tuned for.......such as heads, cam etc.
Just want to have as much info as possible.

As best as I can remember the chip in Post #8 is 100% stock, except for the MPFI programming.

dave w