Thank you Fast355,
I will research this out...sounds good as I see on my 8625 pin A-10 wt wire a signal either to or from the cruise control.
Don't see a similar pin in the 8051 pin outs. Hmmmm...gives me a direction to go. I'll search out the LT1 cruise control module function/pin outs and see what I can find.
Do you know if you can piggy back two VSS signals from the one VSS in the transmission?
My stock Cruise Control module and Rear Wheel ABS module needs a signal from the stock speed signal buffer module, and I had to remove the stock VSS connector (which fed this buffer module) from the trans to hook up the LT1 harness for VSS input.
Still curious about the EBTCM TP pin 12 in the RED connector does....My guess is something with traction control, which I don't have and not all F-bodies had it either. My formula does not, but a guy I know that used to have a Z28 did have it, albeit not for long....
Worse case scenario is I set up either the canister purge circuit or the egr circuit to ground the TCC pin. Really would rather it be correct though.
Either that or I will have to piggy back the two pcm's...not desirable.
Thank you!
James
Bookmarks