24x crank and 1x cam on E67

[kur4o]

I know that it can be done. Anybody have any information at all on doing it?

There is a setting that specifies the crank resolution. The problem is there could alot more to be set along with it.
There is also 3 different 24x option, and I am not sure if they are 24x or 4x. Time based, angled based A, angle based B.
A vin that use e67 with some 24x v8 will be really beneficial to rip off some settings. Not sure if 6.0l vans or mexican trucks [oldstyle ls1 engine] use it.

[Fast355]

There is a setting that specifies the crank resolution. The problem is there could alot more to be set along with it.
There is also 3 different 24x option, and I am not sure if they are 24x or 4x. Time based, angled based A, angle based B.
A vin that use e67 with some 24x v8 will be really beneficial to rip off some settings. Not sure if 6.0l vans or mexican trucks [oldstyle ls1 engine] use it.

I have done a lot of digging on that and came up empty handed. I would be up to setup a 24x 5.3L and try the various options if I had the ability to alter them.