Sorry to Hijack this thread, but I have a similar request. I am still learning (enough to remove VATS, codes, trans, fans etc) but am not comfortable for setting my cammed base tune. I have a Sloppy Stage 2 in my LQ4 with an LS2 intake, I can change the injector flow rates and rev limiters, but could really use some help on the VE side.
I have attached the base tune I will be using, if you're able to help that would be awesome! Trying to safely learn without blowing a freshly built engine.
EDIT: (I'm using the 12587603 XDF) This XDF doesn't appear to be as happy as I thought... Was hoping to use this one as thats what my Stock 5.3 is on. May have to shop around for a different bin or XDF
Last edited by YungTyph; 01-04-2023 at 07:21 AM.
Here is the stock 6.0 tune from the actual LQ4, but it is DBC not DBW. I am not sure if I can segment swap all of the DBW parameters over from my 5.3 tune, but if I can this bin works great with my XDF.
Alternatively, i have the tune above working great with your 12579405 V2.1 Beta XDF, just not sure if the hardware is interchangeable.
If youre able to help me out that would be much appreciated! Happy new year
Last edited by YungTyph; 01-04-2023 at 09:32 PM.
Bookmarks