I have a bbc with a 94 throttle body. When I modded the engine I never took the injectors out, I upped the fuel pressure and did a tune and all has been well for a long time. Lately one injector started to not spray nicely so decided to pull them and have cleaned. When I pulled the injector that was working fine, it was something I hadn’t seen before and hope someone can identify. These injectors are the 94/95 bb injectors that run at 28-30 psi. The injector in question has a plastic top with no markings, a removable filter, vertical feed rather than side and up inside the shaft type end is 6 little holes that the fuel comes from.
Bookmarks