We could always develop one to end his GM business?
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
I know that this is getting a little off topic...
But out of curiosity I googled TunerView...
If this: tv2.jpg& this: http://www.moates.net/tunerview-ii-l...kit-p-223.html
Is what you are talking about it... This just appears to just be an arduino with a very cleverly written "sketch".
I've seen several opensource products that deliver the same functionality.
Making one for ALDL instead of CANBUS (or GMLAN) wouldnt be too great a challenge IMHO.
In fact I'm pretty sure the guys at delcohacking made a black box logger for ALDL... logs to an SDCARD and then imports to TP5.
If I find a little time i'll do a little tinkering and see how great a challenge this would be...
Sorry I was a little behind you with my earlier reply...
Check this out: http://www.delcohacking.net/forums/v...php?f=10&t=890
That is pretty much what is. I don't know enough about the code to be able to modify it and still function. I tried modifying the TV code to be able to add the items I want to display, but it seems it needs a compiler to do that. I can modify something, which breaks the program, change it back, and it works fine again, using notepad.
Post any info you have.I've seen several opensource products that deliver the same functionality.
I've had some correspondence with VL400 about his device, which has helped, I just don't understand C or C++ enough to write a working sketch yet. I'm going to get back into it later this week, to try and get the project moving along.Making one for ALDL instead of CANBUS (or GMLAN) wouldnt be too great a challenge IMHO.
In fact I'm pretty sure the guys at delcohacking made a black box logger for ALDL... logs to an SDCARD and then imports to TP5.
If I find a little time i'll do a little tinkering and see how great a challenge this would be...
Right now, I just want to connect to the ALDL and display one item, after that I can add more to it, I just want the basics right now.
FWIW, I was a beta tester for the TV II being connected to $59, I found a couple issues, even discovered what I thought the problem to be, because I was able to replicate the problem in Tuner Pro, and the supplier argued up and down that I was wrong, that he did everything perfect, then all of a sudden, he discovered that I was right all along and I was finally able to have SA TDC displayed correctly.
He refuses to add anything as simple as knock retard that would create more interest from the GM tuners. He wonders why he has a lack of interest from us, when he won't add what the GM tuners want. Last time I heard from him, I was told "I'll get to it when I have time, and I have other things that are more important..." That was about a year and a half ago. On the flip side, if a Honda tuner/owner asks for a new feature, "Oh yeah, that's a great idea..." then about an hour to a day later... "Here you go, new firmware..." :facepalm:
I'm not sure what I'm going to with my TV II in the end, it has a large 4x20 display, that I could use with my Arduino, or I could sell it to some Honda owner and get most of my money back on it. I'll cross that bridge when I get there. I'll have to see if I can use the moates created interface with the Arduino. Craig developed a small box that connects between the ALDL connector and the TV II, to interface the two. If my suspicions are correct, it is simply a serial ALDL interface.
The man who says something is impossible, is usually interrupted by the man doing it.
I worked with him last fall. I'm still waiting for the 1619747 update. :-(
I think I'll have an Arduino working before then. And I can chose what display I want and where it goes.
Familiar with 1227747 and 16197427 PCMs
If you need help with C \ C++ lmk. Learning code can be tough and trying to do it by yourself can take years.
Shannen
Worked with who?
I agree, once I get a better handle on the C/C++ type programming that the Arduino uses, it'll take no time. I've only been able to do simple things with LEDs and the most basic things with the LCD so far, and my LCD exploits have been less than optimal. I still need to figure out how to program a refresh of the screen, so that the value can actually change.
The man who says something is impossible, is usually interrupted by the man doing it.
Try:
lcd.clear(); // clears the lcd display
lcd.setCursor(col,row); //replace col & row with the address of the data to be written
lcd.print('gearhead'); //replace 'gearhead' with the data to be written to the LCD
I'm no C expert but found the transition from VisualBasic fairly straight forward
Last edited by T2000; 05-02-2012 at 04:01 AM.
Also if you are interested in the opensource OBD Arduino as some inspiration and information ...
Maybe start here: http://en.wikipedia.org/wiki/OBDuino
& http://code.google.com/p/opengauge/wiki/OBDuinoInterface
& http://code.google.com/p/opengauge/wiki/OBDuino32K
& http://www.rx8club.com/showthread.php?t=218257
You will need lots of caffeine though
time to bust out the shovel thread diggin time LOL
vl400 over on delcohacking.net now pcmhacking.net has developed a similar concept for gm aldl style pcms :D its a display and logger logging aldl to SD card http://pcmhacking.net/forums/viewtopic.php?f=10&t=890
Bookmarks