Jim - I'm using RealTerm 2.0.0.70; the chatter on SourceForge looks like 3.0.0.27+ has an option to send as hex. EDIT - I found a 3.0.0.30 beta download site and will try it after work.
Tom - the DVI errors as listed in the OBDXPro VT user's manual are:
Code:
The configuration errors possible include:
const uint8_t Error_InvalidCommand = 1;
const uint8_t Error_RecvTooLong = 2;
const uint8_t Error_ByteWaitTimeout = 3;
const uint8_t Error_InvalidSerialChksum = 4;
const uint8_t Error_SubCommandIncorrectSize = 5;
const uint8_t Error_InvalidSubCommand = 6;
const uint8_t Error_SubCommandInvalidData = 7;
Ah, so that's why kur4o listed 10 as the first byte in the DVI messages! OK, I'll update them and try again tonight.
Joel
Bookmarks