No longer need one. Thanks.
No longer need one. Thanks.
Last edited by JeepsAndGuns; 07-22-2012 at 03:31 AM.
79 Jeep Cherokee, AMC 401, T-18 manual trans, hydroboost, 16197427 MPFI system---the toy
93 Jeep YJ Wrangler, 4.0L, 5 speed, 8.8 rear, homebrew hub conversion and big brakes, hydroboost, 2.5in OME lift, 31x10.50's---the daily driver
99 Jeep WJ Grand Cherokee limited, 4.0L, auto, 2wd, leather and power everything, 99% stock---the long distance highway ride.
are you looking for LB9'S Or L98's I have new and used of both
What are lb9's or l98's? The engine? Doesnt really matter what bin is on the prom, as long as the knock sensor/netress part of the memcal is for a V8. Dont know if it makes a diffrence or not, but I will be using speed denisty, not maf.
79 Jeep Cherokee, AMC 401, T-18 manual trans, hydroboost, 16197427 MPFI system---the toy
93 Jeep YJ Wrangler, 4.0L, 5 speed, 8.8 rear, homebrew hub conversion and big brakes, hydroboost, 2.5in OME lift, 31x10.50's---the daily driver
99 Jeep WJ Grand Cherokee limited, 4.0L, auto, 2wd, leather and power everything, 99% stock---the long distance highway ride.
Yes the lb9 is a 305 and the l98 is a 350, The i/o and netress are the same but the knock filters are different and yes I have speed density ones. I have a new axxb reprogramable one. You can still buy this but its a otp acdelco 16163062. I have a Axxf, Atnx, Axyc,Awfz, 2 of the Anjf, Axcp, and 5 new aujp's, tpis reprogramed l98 vette memcal, Hypertech memcal corvette .bin and knock p/n 121381.
http://www.amazon.com/s/ref=nb_sb_no...words=16163062
are you looking for a 305 speed density or 350 ? and will any bcc work ?
I was selling some on ebay until this guy stated selling these and drove the price of the real ones down
http://www.gearhead-efi.com/Fuel-Inj...highlight=scam
305 speed density code AXXB or one for 305tpi w/auto
I have a axyc I can change into a axxb for $65 shipped, I might have a few more I will go through my drawer of memcals later today.
I have a axxf as well the axyc has been tested but I got it from a guy who unsoldered the chip and jacked up the memcal holder. I remover the i/o and netress and knock filter and soldered them into a another memcal and tested it on my test bench. The axxf is a uv erasable and has never been modified $100 shipped is the best I can do on that and if you need a 730 I can include one for another $25.
130203_0001.jpg
Last edited by Tunedperformance; 02-03-2013 at 01:40 PM.
The Service number of the ECM just defines the hardware, not the application.
The same ECM, for example, the 1227730 was used in many applications from 4 cyl to V8, V6 being most common.
The man who says something is impossible, is usually interrupted by the man doing it.
Exactly what six_shooter said, the one axxb link I posted to amazon is a good deal for a 305 memcal but it is made in singapore at delphi and has a one time program chip soldered in easy to replace though.
Bookmarks