Hello Tom,

Congrats and good plan on looking at it in Tuner Pro. I scored a P59 PCM that supports either DBW or DBC this morning for 16 bucks at my favorite junk yard and will try to load my segment swapped 7603 BIN into it tonight. If LS Droid / PCM Hammer / OBD Wiz / Moto OBD / Torque Pro all seem to think that PCM is running well and has the correct cal values, I will be OK with sending a copy of the BIN to you. That BIN should be run-able as is from me - VATS is disabled and my usual systems and DTC's are killed off. RPM is set to 650 or I can change it to whatever you desire.

I can also pass along my list of typical DTC's to kill.

Rick