autoprom help

[Fast95]

In 0D it should be in your bin file under mask. It's a scalar. As of now it should say 0D...change to AA to emulate and save bin

i found it and changed it to aa will that allow for the tunerpro to make live changes. before i changed this the truck was unresponsive to anything that was changed.

[stew86MCSS396]

This explains it better than I can. http://support.moates.net/obd1-gm-checksum-disable/

Wanted to note that if you hover over the items in the parameter tree, pop up window sometimes have useful bread crumbs left by the person that wrote the xdf or you can select parameter and press F2 to view. All those read mes in the pic have useful info too

[Fast95]

This explains it better than I can. http://support.moates.net/obd1-gm-checksum-disable/

Wanted to note that if you hover over the items in the parameter tree, pop up window sometimes have useful bread crumbs left by person that wrote the xdf or you can select parameter and press F2 to view. All those read mes in the pic have useful info too

good deal, the link helped. im green in the tuning world. i found an interest in the tbi system for my 385 fastburn and took the leap,sure i can just slap a carb on it and go but what fun would that be? i like the idea of better control over operation than available with a carb. thank you for the help.

[Fast95]

is there a way to get the parameters i want to change i a group together instead of having to scroll the entire parameter list to find them, i know i can open the window for each one but is there an easier way.

[stew86MCSS396]

Not what you're asking for but at the top right hand corner of the screen where it says "All Levels" change it to "Level 1" and it'll show less parameters. Mine seems to always default back to "All Levels" upon restarting the program.

[Fast95]

Screenshot (2).jpg im running windows 10, the only option see is at the top right of the parameter tree, im new to all this so any and all help is welcomed

[stew86MCSS396]

Sorry, on the top View/Toolbars, I have mines all checked but it's the "Visibility Levels" that needs to checked.