Installed a VSS and still no DFCO. Tried setting OL decel enable MPH anywhere from 6MPH up to 80. No difference. Someone out there must have had and fixed this issue. How about it?
Installed a VSS and still no DFCO. Tried setting OL decel enable MPH anywhere from 6MPH up to 80. No difference. Someone out there must have had and fixed this issue. How about it?
Take a look in Scalars/DFCO - CTS to enable DFCO, it may have been set too high to disable it for data logging BLM? Try setting it to ~56*C
Last edited by PlayingWithTBI; 08-21-2020 at 01:28 AM.
It is set to 56C. Did you mean -56C? Do you think +56C is too high?
No I meant around 56C. In looking at my .bin, DFCO-CTS to enable DFCO is in 2 different places in Scalars but if I change 1 the other changes too, weird. Here's a couple snips of what I can find in my mask. The DFCO 7747 is in Scalars and the DFCO is in Tables, HTH
DFCO.JPG
Ooops, I didn't get them all in Scalars, sorry
DFCO SCALARS.JPG
OK, I'm using TC $42 so my format looks a little different however from what I'm looking at most of my settings look very similar except I've cut my 'DFCO exit PW' to 0.00 to make sure nothing is going into the engine (figured if it worked I could work backwards from there). What I don't have is a 'DFCO min time' setting (so I don't know what that is) and a 'DFCO PW multiplier' setting should they make a difference.
I can't help you with TC, maybe someone else can jump in?
Bookmarks