The link you posted is pointing to some datamining site "skimresources.com" that my adblocker says is malicious. Figure out how to post an actual link and more people might try to help.
But...
Let me guess - it idles like crap and BLMs are all over the place?
I own a set of chinese knock-off 36lb injectors. They seemed really cheap. But they weren't actually fuel injectors - they were in fact very expensive keychain fobs. If what you have are similar, I wouldn't advise trying to tune around them. They act nothing at all like real Bosch injectors. You might be able to get them to behave for WOT use only, but the low pulsewidth behavior needed for idle and part throttle is going to be difficult to figure out through trial-and-error.
Edit: I dug around and found the attached file from when I was attempting to get these working. The info was mostly copied and pasted from the auction listing, including the blurb:
Code:
Possible BOSCH equivalents:
0280155811
0280155737
The 42lb/hr spec I believe is at 4bar / 58psi, and 36lb/hr is at 3bar / 43.5psi.
The seller sent me some offset data which I included in the file. But I was never able to get them to run worth a damn.
Bookmarks