Flashhack - New LT1 flash tool

[NomakeWan]

right on, i'm pretty sure it wont let you down if you don't lose power. i haven't been able to botch a flash with it despite my best attempts. flash is actually 1000x more tested than read is, i've barely used the flash read thing, maybe 20 tests, but i've looped the flash routine overnight a few times. i was worried it failed once but it was actually just solder breaking loose on the socket.

Okay, I went ahead and flashed a new program. All I did was change some fan-related settings and the VE table. First attempt to flash failed because the program noticed that my E-Side code had patches and thus was incompatible. Something to work on going forward, perhaps, to make sure that community patches from EEHack/TunerPro work with the recovery patch, I guess. So then I disabled just the E-Side recovery patch and flashed. I think leaving the T-Side recovery patch enabled may have caused the complete re-write. Perhaps had I disabled that too, it would've flashed less. Not sure.

Either way, here's the first write to a Corvette using Flashhack, which was a success.

The '94 doesn't use any patches from EEHack since it was unsafe to flash using that program in the past, so I'll make a few minor changes to its BIN as well and try to flash and see what happens. Perhaps tomorrow.