Opensource LS Flashing(It's Closer Than You Think)

[B52Bombardier1]

Hello,

Not only has it been released, it works very nicely. I have already used it to clone a PCM but I wrote a new OS+CAL tonight to my lab rat P59 PCM for the very first time using my bench wiring harness. No problems. I have not put this P59 into a vehicle but every OBD II app that I have reads it perfectly. This was a 1 megabyte BIN from a 2004 Chevy SSR truck that is considered to be the "universal donor" BIN for P59 PCM's because it has pretty much every feature anybody would ever need.

I used a matching XDF for the SSR BIN inside of Tuner Pro RT to make all the changes needed - VATS, EGR, EVAP, Fuel Level Sensor, Air Injection, Catalyst System Efficiency . . . everything.

Rick

[bigbill0679]

Hello,

Not only has it been released, it works very nicely. I have already used it to clone a PCM but I wrote a new OS+CAL tonight to my lab rat P59 PCM for the very first time using my bench wiring harness. No problems. I have not put this P59 into a vehicle but every OBD II app that I have reads it perfectly. This was a 1 megabyte BIN from a 2004 Chevy SSR truck that is considered to be the "universal donor" BIN for P59 PCM's because it has pretty much every feature anybody would ever need.

I used a matching XDF for the SSR BIN inside of Tuner Pro RT to make all the changes needed - VATS, EGR, EVAP, Fuel Level Sensor, Air Injection, Catalyst System Efficiency . . . everything.

Rick

i was speaking about the ls droid video i saw with segment swapper but read on thread more and saw there is a delay due to tech diff. i was hoping this rolled out i do it now the same way u have stated .. i cant wait for xpro vt too be avail look up petes160plus youtube channel it shares teasers as i call them

[bigbill0679]

would you share 2004 ssr xdf and bin stock files or location

[NSFW]

PCM Hammer Release 14 is out!

Improvements in this release:

- Reflashing is reliable with the new ObdX Pro devices.

- Reading and writing are significantly faster with AllPro devices, and slightly faster with ObdLink devices.

- And a few minor bug fixes.

To get the zip file, go here...
https://github.com/LegacyNsfw/PcmHacks/releases
...click "Assets" at the bottom of the release description, and click the zip file.

Extract the zip file to your hard drive, and have fun.

If you're not familiar with PCM Hammer, you might want to read this:
https://github.com/LegacyNsfw/PcmHacks/wiki