I noticed in your log16 that your at 50% throttle and not accelerating. I had the 23,000 SA and the throttle response problem. 121 log is with the 23,000 glitch that I had
121.xdl. I raised the main spark tables to a higher value at lower RPMs and changed AE MAP and TPS and it helped, but it didn't stop the problem until I set altitude spark bias to 0. If setting it to zero gives it more timing, did it just get more timing that it needed and masked the problem? Here is the BIN and ADX I'm using. hope this will help.
BJYK.bin.
A217_0D_AEMx.adx. this is a datalog after changing altitude spark bias
altbiasfixedit.xdl
Bookmarks