The weird thing is the car goes in full yourself
Same way you downloaded it. Go to the Flash function in EEHack and put your modified BIN in "BIN to flash" and click upload. Uncheck the box that says "insert patches" if you want the flash to go really fast--like 40 seconds fast. In my experience as long as voltage is above 12V, you're fine. I've flashed plenty of times without being connected to a charger. But if you want to be extra safe, then go ahead and connect to the charger.
Huh. So how is it getting both readings? I guess that just confirms his MAP sensor is shot?
patches don’t slow the flash down.
just like with most fuel injecton systems without a separate baro sensor, it gets barometric pressure from the map sensor when its likely that the intake is at atmospheric pressure (not running or at wide open throttle under certain conditions). thats why disabling the barometric update is important on most of these old gm engines if you run boost of any kind, you don’t want it thinking 10psi is baro when you floor it.
if you’re on a trip through the mountains its a good idea to either take a rest stop or floor it once in a while
Is it possible to remove the map sensor, and that the engine at the same time worked stably
simply engine works normally, but is ablaze a check
Last edited by mastermind; 11-23-2019 at 10:27 PM.
Please see BIN. The first bin when the detonation sensor shows an error, 2 bin when the detonation sensor is already fixed, but already shows on the map sensor (2 bin-new firmware without EGR )
They do when you go from OEM (which he has) to patched the first time. It even tells you straight-up that since both sides have to get flashed, it's gonna do the full flash routine instead of the short version. ;)
No, it is not. Technically you can run on the MAF but I'm pretty sure it's important to have a working MAP sensor at all times. Someone can argue with me on that but in my experience, the MAP is very important.
What about the BIN do you want us to see?
Here you cannot insert files eehack? And will MAP from 5.0 caprice fit?
Guys, no one knows how to remove errors on air bag ? There was an accident, the airbags and sensors were changed, but now the air bag is on fire.
Change the airbag module. If the airbags were deployed the error is hard coded and can`t be cleared.
Well, I have a module from 93 years, how do you think it will fit?
Bookmarks