I have searched these forums and have been able to find very little information on datalogging the transmission information in either of the programs listed above. Can anyone point me in the correct direction? In a related question, Tunerpro RT shows which gear is manually selected but I don't see an entry for actual gear. In $EEHack 4.70, the base Dash shows Transmission current gear and TCC lockup. Is $EEHack 4.70 calculating the current transmission gear using the Solenoid A and Solenoid B and current manually selected gear to determine the current transmission gear? Is this current gear option available in TunerPro RT in the standard datastream? Also, $EEHack doesn't seem to show the TCC/Brake Switch input unless I have overlooked this. I also tried looking through User Parameters but didn't see any pcm inputs.<br><img src="http://www.gearhead-efi.com/Fuel-Injection/attachment.php?attachmentid=14759&stc=1" attachmentid="14759" alt="" id="vbattach_14759" class="previewthumb"><br><br>Thanks,<br><br>mdavid thomas
Bookmarks