No, i updated my pcm to an OS with an available xdf file and now all is working fine
No, i updated my pcm to an OS with an available xdf file and now all is working fine
Hi Im quite new to this thread and forum. Im having problems Downloading the attached files.
I got the TunerPro editing software - for LS1 type PCMs.pdf and printed it.
Im having trouble with PCM OS Checksum Plugins.zip as when I click the link and select save as it goes to save a attachment.php then Im not able to open it.
Am I doing something wrong?
I believe that someone said IE does that if you're not using "compatibility mode." You can right click, "save as," then type in the file name you want.
Hi Guys, I have managed to the the Bin file from my PCM a OS 12212156 which came with the LS 6.0 Engine I got from a scrap yard.
I also got the .xdf file for the 2002 GM Vehicle in this thread.
The original transmission is showing as a 4L80E but I want to use my 700R4 as this has very recently been fully rebuilt.
The 6.0 LS will be going into my 1989 GMC Vandura G2500 Van.
Am I able to just change to transmission type and then save or is it more complicated? to I need to change other settings aswell.
I need to delete VATS
EGR
Cooling fans
Probably the Speedometer section with wheel size etc.
Maybe the 02 Sensors aswell. (still reading up on whats needed).
Many thanks.
I'm glad you've figured a way around the issue. When you "Save As" the browser suggests a filename. You can change the name of the file by typing in the name manually.
Unfortunately I can't get screenshots at this time as my browser saves the files with the correct names.
Thanks I'll give that a try aswell.
I am not finding .xdf files for 2000 LS1 cars.
I have a 2000 Camaro M6 that is using the OS 9381344.
Can anyone help or point me in the right direction?
I've had my computer mail order tuned way back when I was first working on my build and was hoping to just tweak the "Safe" tune. It is very rich and has some idle issues with the A/C on. If I update the OS and flash a new .bin, I'll be back to square one... Correct?
Thanks for the help.Yes that is correct, you'll have to tune the pcm
Would I be able to save my .bin file and revert back to the 9381344 OS and the "safe tune" if I needed?
Can the OS be updated by importing a new Bin File for the 12202088 OS, changing the VIN, and then write the OS and calibration to my current PCM?
Bookmarks