Well, I don't know enough about programming the 0411 pcm to know if it won't work. Retroprogramming, if you will. I figure somewhere in the memory, the math for crank velocity can be accessed from a vortech 0411, and spliced into a ls1 binary, and possibly work. This is idealistic thinking, of course. I expect a loss of resolution, but wonder if it can be managed.
My original thought, was to just use the pcm to handle timing and misfire detection, while letting the the diy-ltcc do its thing. Then I started imagining the above scenario. I have no immediate plans to do this just yet, because I need to learn a whole lot more about 0411 binaries.
If everyone says it can't be done, then so be it.......I will stop pestering. Kur40's post beat my reply before I could press enter.
Bookmarks