TunerPro Connection issue 7747 $42

[EagleMark]

Well just click on it and wait for your computer to respond. Or right click and save target as. Just checked them and they both work. Had other people use them fine.

Your TunerPro freezing when opening a new ADX file happens to me sometimes when I have history tables, monitors, Item lists or dash boards open from another ADX file. Close all them and open the ADX from above.

[ninerscout]

Thanks a lot EagleMark, I closed everything and the ADX opened fine. I would like to figure out why I can not get the XDF to work. I know I am just doing something wrong. I am going to log data today and work on it tonight.

Ninerscout

[EagleMark]

Well you have to Select XDF and it will load in TunerPro. Then file Open Bin and it has to be a $42 mask ID bin for the $42 Mask to work. Post up your bin and I will check it.

Remember to connect to car when running and if getting data have to go to Acquisition then Record and you will be recording data, then when done Acquisition stop and you will be promoted to save the file with a name.

[ninerscout]

I can get $42-1227747-V4.1.xdf‎ to work but only as a $42-1227747-V4.1.htm. Everything comes up. Lots of options. I hope everything works O.K. as a .htm file. I figured a lot of things out from all the threads on here and various other forums.

Thanks Everyone,

Ninerscout

[EagleMark]

That should not work right. I don't know why you haveing an issue downloading the file but if you email me or PM me your email I will send it to you.