I'm hoping to find information on how to adapt 700R4 TV Cable linkage to a LS1 Drive by Cable Throttle Body. The LS1 Drive by Cable is from a 2002 Camaro.
Thanks in advance,
dave w
I'm hoping to find information on how to adapt 700R4 TV Cable linkage to a LS1 Drive by Cable Throttle Body. The LS1 Drive by Cable is from a 2002 Camaro.
Thanks in advance,
dave w
Perhaps this is the kit you were thinking of? http://www.bowtieoverdrives.com/cata...php?ITEMID=225
dave w
Dave w can u show a pic of the factory ls throttle body and the area around the lever where a cable mount might be placed. I'm unfamiliar with ls stuff but have done more than a few custom throttle levers and a few for 700 r4 non oe applications.made cable holders and such and have the geometry measurements for what it's supposed to do.
Jeeper
87 sjimmy powered by a 92 cadillac 4.9L pfi on 7427pcm /700r4/ 8.8 3.55 rear/disc brakes.
This looks pretty doable. https://www.youtube.com/watch?v=C8NIPYwLa5o
That air filter is probably better sized for a lawnmower though lol
Homemade injector flow bench: https://www.youtube.com/watch?v=e_g9K0VEsfE
http://www.youtube.com/watch?v=zBYMtJO0pX8
I don't have actual pics, see links below.
http://www.lokar.com/assets/instruct...bleBracket.pdf
and
https://www.ebay.com/itm/1998-2002-C...dRG:rk:29:pf:0
If a 3 cable set up is what u will use I'd grind the weld off and replace it with the arm off a tbi and make a single bracket that holds all 3.if no cruise control will be used I'd use the stock arm and make required add on for the tv cable.some fwd set ups of the 90s have bell crank for dual cables and the half moon shaped arm has dual cable groves. Could be adapted.if just the 2 cables the lokar cable holder adjuster look very cool.mount the tv cable holder opposite the one in the lokar pic and a pin on the throttle arm for cable attachment according to the geometry required to get the correct tv function.
Last edited by S.O.B.B.; 02-06-2019 at 12:44 AM.
Jeeper
87 sjimmy powered by a 92 cadillac 4.9L pfi on 7427pcm /700r4/ 8.8 3.55 rear/disc brakes.
Did the diesel application use TV ?
Bookmarks