I've been working on my 1995 Cadillac powered Chevy for a while and got most of the bugs worked out. I was hoping to get some feedback to see if I've made in egregious errors or if I'm on the right track. I've attached the bin and a couple log files.
The specs are 1976 Cadillac 500, 1988 454 TBI with the red/black injectors. I am using the factory 454 Quadrajet adapter. I am using the 500's distributor with a lockout set to 12 degrees advance. I have converted it with a module from a 4.9 and a 368 Cadillac pick-up coil. I am using a dash/ecm 3 pin combo temp sensor located next to the thermostat. All the other sensors are from my old 350. Trans is a 1995 4L80E 350 stall rebuilt with dual feed and couple mild upgrades.
Bookmarks