Ive soldered in sockets but need the bin files. I found set on here but the car wouldnt start so would like to know if someone has a set or where I could find them. Can I get them from GM's site somehow?
Ive soldered in sockets but need the bin files. I found set on here but the car wouldnt start so would like to know if someone has a set or where I could find them. Can I get them from GM's site somehow?
Hi
I'm certain you'll need to flash the roms with an image first before you can connect through the PCM.
The images seem to be scrambled a little... I guess the address / data pins are swapped over to make things difficult to view.
I never did figure out how / where.
I do have stock 1995 T & E side Flash Rom Images.
I have others I think but these work on a 16188051 LT1 PCM.
email me - TerminalCrazy at sand-hill.uk and i'll post them over
Mitch
'95 Z28 M6 -Just the odd mod.
'80 350 A3 C3 Corvette - recent addition.
Sent email and willing to try 95 but mine is a 96 OBDII.. but if I can boot and communicate maybe I can send m jet DST tune to it and make it work.
appologies, that should have been Terminal_Crazy at sand-hill.uk
'95 Z28 M6 -Just the odd mod.
'80 350 A3 C3 Corvette - recent addition.
You can contact tunercat and ask for the raw bin files for 96-97 PCM.
When you recover the PCM can you please read the raw bins and post them here with a picture of the chips used. It will be good to have them available if needed.
Bookmarks