Results 1 to 14 of 14

Thread: Serv No 16196396

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 08-20-2018 #1
    steveo
    steveo is offline
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,057
    What live data is available on this ECM?
    you can open the adx in tunerpro without any vehicle connected to see the data list
    My free software::
    EEHack : Advanced LT1 Datalogger, Analyzer
    flashhack : Ultimate flash tool for LT1, P66, etc.
    EEX : LT1 Tuning Definition (For TunerPro)
    tablehack : Tool for tables and datalog analysis
    FBODYTECH : EE Tuning Website (Bins, Tutorials, Etc)
    Reply With Quote Reply With Quote
  2. 08-22-2018 #2
    KoolBreeze
    KoolBreeze is offline
    Carb and Points!
    Join Date
    Aug 2018
    Age
    52
    Posts
    7
    Sorry, double post.
    Reply With Quote Reply With Quote
  3. 08-24-2018 #3
    KoolBreeze
    KoolBreeze is offline
    Carb and Points!
    Join Date
    Aug 2018
    Age
    52
    Posts
    7
    Got the ALDU1 and CABL1 from Moates, installed the drivers and connected it to the truck. Oddly the dash board works but the list view does not. Any idea what that could be? Having the 10k mode enabled also caused the idle to increase and the truck to miss badly under load. Hope that didn't hurt anything.
    Reply With Quote Reply With Quote
  4. 08-25-2018 #4
    KoolBreeze
    KoolBreeze is offline
    Carb and Points!
    Join Date
    Aug 2018
    Age
    52
    Posts
    7
    Switched to a different laptop and that solved the problem. Works great now.
    Reply With Quote Reply With Quote
  5. 09-05-2018 #5
    KoolBreeze
    KoolBreeze is offline
    Carb and Points!
    Join Date
    Aug 2018
    Age
    52
    Posts
    7
    Does anyone have newer/better XDF and ADX files than the ones I've attached here?
    Attached Files Attached Files
    Last edited by KoolBreeze; 09-05-2018 at 07:13 AM.
    Reply With Quote Reply With Quote
  6. 08-02-2022 #6
    Rob 689
    Rob 689 is offline
    Fuel Injected!
    Join Date
    Aug 2022
    Age
    30
    Posts
    167
    Quote Originally Posted by KoolBreeze View Post
    Does anyone have newer/better XDF and ADX files than the ones I've attached here?
    thnk you very helpful. i have ecm 16196396 and cant find any support for adx and only ne place i found xdf except for in this thread
    Reply With Quote Reply With Quote
  7. 08-02-2022 #7
    Rob 689
    Rob 689 is offline
    Fuel Injected!
    Join Date
    Aug 2022
    Age
    30
    Posts
    167
    I also have the BDUY prom coincidentally... also with a 5 speed manual... what are the odds lol
    Reply With Quote Reply With Quote
« Worth upgrading my ECM?? | Wide and o2 to run closed loop? »

Similar Threads

  1. Anyone have a GM 16196396 ecm pin out diagram?
    By EDZIP in forum GM EFI Systems
    Replies: 2
    Last Post: 12-06-2015, 07:27 PM
  2. What to log? 16196396 '95 K2500 5.7 NV4500 5sp
    By andyk1500 in forum GM EFI Systems
    Replies: 8
    Last Post: 12-31-2013, 06:06 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules