This just in.........Android is now a up and running. Tested in vehicle tonight using an Allpro dev board with Bluetooth Hc-5 module....verified my Bin file was correct with EFI Live and it passed with flying colors
This just in.........Android is now a up and running. Tested in vehicle tonight using an Allpro dev board with Bluetooth Hc-5 module....verified my Bin file was correct with EFI Live and it passed with flying colors
On the blue/clear PCM-when I say the hardware is very similar-I mean it's *VERY* similar. It's used with the LS4 V8, as well as most all the 60*v6's and the shortstar V6's, so as you say-might need a slightly altered flash kernel, but it is contemporary to the 512K and 1Mb LS PCM's.
LSDroid is looking pretty cool-combined with a decent OBDII datalogger, it could be pretty powerful.
I see your bigest obstacle is the flash routine.
Can you add an option for user provided flash routine with some small config file containing data as seed/key algo used and some basic stuff as commands and how the bin is dumped to memory.
I found that all obd2 gm pcms support mode 3a and 3b to stream data. When the PCM is configured It starts to dump continuous data with 8 messages containing 6 bytes of data each. So you got 48 bytes with super fast refresh rate. It will be nice addition to read/write functionality. I know that elm devices have some built in inability to recieve more than one message. That can easily be overcomed with monitor all command when the pcm is configured and starts dumping the data.
If you want to add it to the android application I can give you more details.
How's this going? Haven't heard from you in a while, Pete!
I'm just gonna leave this here......
Screenshot_20180914-001111.jpg
Pete, I'm not going to lie, while I feel I know more about computers and electronics than the average joe I still have a lot to learn from people like you. What does that mean exactly? I know you post on LS1tech, I'm over there also.
I Appreciate everything you do, even though I don't understand 100% of it. I know you got some flak from at least one dude on tech. Haters gonna hate.
Homemade injector flow bench: https://www.youtube.com/watch?v=e_g9K0VEsfE
http://www.youtube.com/watch?v=zBYMtJO0pX8
Bookmarks