I have a heated 4 wire NBo2 hooked to the pcm. The innovate WB is only hooked to the gauge, and then the 0-5v output wire hooked to the egr pintle pin on the 7427 with the required bin mods to datalog it.
I did notice, the virtual gauge on the laptop for WB, and the gauge itself are not reading exactly the same.
I'm still a noob at most of this and dont understand what you mean.I noticed on your screen the nb o2 volts are doing the same as mine diping down into the double digits. have you noticed any issues with this?
Bookmarks