Anyone know the screw size and thread count/pitch of the torx screws that hold on the throttle position sensor to the throttle body? I’ve misplaced them. Thanks
p.s. Off a ‘92 Caprice 5.0L if it makes a difference.
Anyone know the screw size and thread count/pitch of the torx screws that hold on the throttle position sensor to the throttle body? I’ve misplaced them. Thanks
p.s. Off a ‘92 Caprice 5.0L if it makes a difference.
i'm not 100% sure that your TBI is the same, but they really like to use an M4.5x7.5 screw for their TPS sensors
insanely hard to find to say the least
Good afternoon, Gents -
For most any GM fastener, I've had great success with Northland Fasteners: http://shop.northlandfasteners.com/main.sc
I hope this helps.
In case anyone need to know in the future, turns out they are 10-32 thread about 1/2 inch long.
Bookmarks