I have bin file pulled from my wj 4.0 pcm. Pm me if needed.
mekkis, you still out there? Any updates to flashing these POS's? I still have the very basic XDF you posted a few years ago. Do you have a more defined xdf you are willing to share?
'86 Grand National
Guys!
Does anyone have definition file (xdf) for my ECU?
It seem like soon we will have a device to read/write/diag JTEC via OBD.
This guy here http://sykedecutuning.com/store/index.php covers a lot of odd ball mopar stuff. I'm waiting on the laptop based interface to be release $25 credits to tune a vehicle
Last edited by roughneck427; 11-08-2017 at 03:38 AM.
hey guys you helped me a lot so im giving back here is a start ill send links and more info later its the standard part numbers for the two Motorola mcus which are protectively labeledIMG_20180212_003754[1].jpg
Hello all. I beg for your forgiveness about my ignorance. I have been studying for quite some time about Jtec programming and tuning. I am so new that i haven't been able to figure out what cable/software people are using to pull the bin from the pcm and wright to the pcm. I am knowledgeable in Bosch stuff and have several cables/systems but none have options for the jeep i am currently attempting to master. My goal is to clone a jeep pcm. Thanks for any help !!
hey so if you look at the inside of your ecm/pcm you will see two chips the main mcu runs a basic initialization code that pulls pretty much everything from these two chips check out how arduino read eeprom im working on decompiling to source rn cause i got a friend who needs some limters programed
is there a link or could you elaborate about how the arduino is used. I have some alien tech but it doesnt support this ECM chrysler P/N P56041746AD. I have a galletto and some other cheap cables. Thanks for the reply!!
Bookmarks