if you slide the right swith to the right use plug in in the prefrences, that's for data logging. if it is slide to the left it is for using the program you load into the autoprom to load in your ecm. but unless it is hooked to a ecm I don't think it will connect. I think that is when you choose autoprom in preferences. I will hook mine up tomorrow and make sure I my be wrong.there is a help on moates web about this but its not listed as help. in preferences its got chech for working comm port also. when that box opens up in tunerpro showing com port 1 push that arrow and see if it lists more com ports if it does push it and then push check for working com port. the forward an back ward arrows in tp toolbar [aquier data] is what is used to connect the autoprom when data logging.i got it backwards, on my ap both switches go to the inside for data logging, for eliminating the outer switch slides to the outside.
Bookmarks