Quote Originally Posted by spfautsch View Post

Do you mean the 'Injector Offset Adder' table (tunerpro)?
Yes.

The voltage offsets I have are slightly higher than the stock figures at around 13V but I don't think they affect much if the motor is running well (and electrics are stable). (same sort of curve).


If your injector constant is upto 46 on 36lb injectors they should be running _very_ lean.
I'm now down to 38.5 on the Injector Flow Rate on the 42lb to keep the VE table within range.

Running CL here even with a crappy VE table, the car would tune itself back happily enough.

I hope the new injectors will cure your issue.

Mitch