Hi Guys! Trying to get EEHack to work with my Wideband. It seems that the wideband is causing interference with the serial connection.

I am getting the error in EEHack "SERIAL: ECHO CORRUPT! (bad serial interface?)

I am running an AEM wideband powered by the aux power wires by the shifter in my Camaro. Also using a Red Devil River cable if that matters.

EEHack connects fine if I disconnect the power to the wideband gauge. The gauge also causes an issue with Winflash too. It will only read or flash if I disconnect the gauge. Datamaster works fine with the gauge connected.

The only two things I can think of trying are powering the gauge from somewhere else or maybe a different cable. Any suggestions? Thanks!