Results 1 to 15 of 21

Thread: 5.7 vortec runs rich

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 03-26-2017 #1
    dhworkin
    dhworkin is offline
    Fuel Injected!
    Join Date
    Jan 2017
    Location
    St Augustine FL.
    Posts
    141
    Thanks Dave W. I'm not that far along yet. Only have cable and Tunerpro rt so far and want to know what hardware is needed to do the adjustments. 95 obd1 16197427
    Reply With Quote Reply With Quote
  2. 03-26-2017 #2
    dave w
    dave w is offline
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,349
    One option is to use the Moates.net Burn 2 Chip Programmer (http://www.moates.net/burn2-chip-pro....html?cPath=64), G1 adapter, ZIF Socket, and 27SF512 Flash Chip. Another option would be the Moates.net Ostrich 2.0 (http://www.moates.net/ostrich-20-the....html?cPath=64). I like the Ostrich 2.0, because I can make changes real time, even when driving!

    dave w
    Attached Images Attached Images
    Reply With Quote Reply With Quote
  3. 04-20-2017 #3
    dhworkin
    dhworkin is offline
    Fuel Injected!
    Join Date
    Jan 2017
    Location
    St Augustine FL.
    Posts
    141
    Hey Dave W, I ordered the ostrich 2.0 today. I'm running a Harris chip and wanted to know if I need the G1 adapter, zif socket and 27sf512 flash chip
    Reply With Quote Reply With Quote
  4. 04-20-2017 #4
    dave w
    dave w is offline
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,349
    Quote Originally Posted by dhworkin View Post
    Hey Dave W, I ordered the ostrich 2.0 today. I'm running a Harris chip and wanted to know if I need the G1 adapter, zif socket and 27sf512 flash chip
    You will need the G1 Adapter.

    dave w
    Attached Images Attached Images
    Reply With Quote Reply With Quote
  5. 04-21-2017 #5
    dhworkin
    dhworkin is offline
    Fuel Injected!
    Join Date
    Jan 2017
    Location
    St Augustine FL.
    Posts
    141
    Thank's Dave w, I should be getting it by Monday. The moates site said to do a lot of reading beforehand. What threads do you recommend.
    Reply With Quote Reply With Quote
  6. 04-26-2017 #6
    dhworkin
    dhworkin is offline
    Fuel Injected!
    Join Date
    Jan 2017
    Location
    St Augustine FL.
    Posts
    141
    Got the ostrich2.0, and G1 adapter installed in the 16197427 ecm. Will $OD work with my 95 gmc pickup w/4L60E? Is the bin that I need (ANZA.bin)?
    Reply With Quote Reply With Quote
  7. 04-26-2017 #7
    dave w
    dave w is offline
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,349
    Have you been able to read the .bin file from your original Memcal? Maybe you can post of pic of your original Memcal showing the BCC?

    dave w
    Reply With Quote Reply With Quote
« Tachometer works on real dash but not on Tunerpro Dash. Was working fine yesterday. | TPS Troubleshooting. Project intro. Vortec Head Swap on 93 Z71 4x4. Working out Bugs. »

Similar Threads

  1. Engine swap put a vortec motor in non vortec truck and runs horrible
    By Stewh1 in forum GM EFI Systems
    Replies: 14
    Last Post: 03-17-2016, 01:04 AM
  2. 350 Vortec wi th 454 TBI running pig rich
    By rsicard in forum GM EFI Systems
    Replies: 80
    Last Post: 08-08-2015, 03:55 AM
  3. Runs worse as it learns....
    By mikeames in forum GM EFI Systems
    Replies: 20
    Last Post: 06-19-2014, 05:59 AM
  4. truck runs for 30 sec then dies help!!!!!!
    By lilhupper in forum GM EFI Systems
    Replies: 50
    Last Post: 03-25-2013, 02:50 AM
  5. 165 ecm 5.0 runs best with MAF unplugged
    By jameslleary in forum GM EFI Systems
    Replies: 4
    Last Post: 03-23-2012, 05:49 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules