Hello, my ecm is mounted under my bench seat. Whenever i want to burn a chip i have to get out, go to the passenger side and reach behind the seat and feel up underneath for the ecm and remove the chip burn it and then repeat the process to replace the chip. Its such a pain to do now that i am burning chips daily. I had an idea to relocate the chip via a cable like the one used on the ostrich. I was browsing moates website and see they sell a chip extender. If i go the chip extender route and then buy the emulation cable and zif its like $50 with shipping just to move my chip. I did some googling and it seems others have relocated the chip without needing the chip extender. Seeing as im a poor college student i am trying to do the chip relocation on the cheap. I am interested in seeing how you relocated your chip and if you used a chip extender and what problems you ran into.
Bookmarks