not working with a 1BAR while the 2/3BAR patch is present is expected, I didn't find that code error for quite some time and haven't fixed it out of not expecting the scenario to be used.
once solid communications can be established, it will help considerably, but I'm not sure where something would go wrong considering I nearly just ported the exact same boost code that works perfectly from my nAst1 project. when we can see what kind of advance and pulsewidth is being commanded, it may clue in what's going on.
at 8.5 volts, I'd be amazed if any of the relays weren't about to start opening up/chattering. that's if you're actually seeing 8.5 and something isn't causing the PCM to see that(weak circuit).
Bookmarks