....
....
Last edited by LRT; 05-24-2021 at 11:15 PM.
I'm using the EFI connection one on a 400SBC block. We put a fairly liberal amount of RTV sealer on it, but it may have just been a bit too much oil in the pan and pressure blew it out.I'll tool around with the program and see what I can find. I'm still deciding if it would be a better idea to put a SOP socket on the PCM instead of soldering the flash chip back on, but I suppose once the COS1 is on there I can reflash the tune with the Flash tool so long as the OS stays the same.Did you have just a stock COS1 or any COS1 BIN file I can use to load onto the chip and see if I get the PCM working again, then we can flash the tune on when you get the time to work on it?
....
Last edited by LRT; 05-24-2021 at 11:15 PM.
Ah ok, no problems. I've got plenty to keep me busy int he meantime haha.Thanks again for all your help with this.
Would either the COS1 or COS3 bins be usable with a 2088 XDF in tunerpro? I have a few car projects that would be real nice to have running on 0411 pcm's. One can run a MAF, the other 2 I'd prefer SD and one of them will be running a 2-Bar MAP. The boosted car runs a 4l80E, the other SD car runs a 4l60E and the MAF car runs a 700R4. I'd like to just use 1 XDF for everything.
So far all my searching has only turned up 2 usable XDF's for 0411 PCM's and nothing for the 1MB p59's yet.
....
Last edited by LRT; 05-24-2021 at 11:15 PM.
Bookmarks