Yes, I can read/write to the PCM myself. I am attaching the current BIN - this is the third revision from the tuner and the one that's currently being run. I'm having a weird issue with the trans as well. Once its warm, going from park into drive will slam the trans into gear, as will drive to neutral, or neutral to anything other than park. I have another BIN (the previous version of this one) and this issue was not there. For reference, the car is a 95, no EGR, 383 with TrickFlow GenX 195s, 3k Yank stall, 3.08 gears, cam is 224/230 .563/.544 112 LSA. BIN is attached. I suspect the rev-cut is set to 6250, and that may be where it should be - but I don't know, nor do I know why the trans is waiting that long to shift out unless it has been programmed to do so. Thanks in-advance, my friend.
Bookmarks