If anyone wants to try this i just copied Cats columns like SteveO said.
Preface: 1995 Caprice Classic LT1.
Here's a connection log (verbose) WITHOUT removing the 3 fuses I mentioned earlier. This is simply plugging it into the car and trying to connect.
I am able to use this program to flash bins to the car once I remove the fuses. TunerCat's flash program nuked my spare PCM, so eeHack has become my primary flasher.
That being said, I noticed that when I was flashing a tune today, the program connected, fans kicked on and off, then the purge valve cycled every second or so - all the way through the flash routine. No errors in the process and the car seems to run fine now. Purge valve stopped cycling once the process completed.
thats normalThat being said, I noticed that when I was flashing a tune today, the program connected, fans kicked on and off, then the purge valve cycled every second or so - all the way through the flash routine. No errors in the process and the car seems to run fine now. Purge valve stopped cycling once the process completed.
i would just like to bump this thread and say that development still kinda continues, despite me not even having a car (all bikes)
currently i'm working over some stupid bugs in the last release, and maybe will implement a fuel economy parameter. we'll see.
Any chance of getting the part where you can add the ram/gibberish to the bin being pulled fixed? It's not adding the ram part. Thanks Jonathon
97z28 A4 obd1 swap(16188051)
Tunerpro Newbie
i rewrote the 'settings and config' library a while ago. been notified that the 'silence extra modules' is not working properly either. probably botched that setting too, i'll look at it.
ok i figured out the extra error counts on connect, the dump ram not working, and the silence extra modules not working.
there's still a weird bug i can't figure, some users report (and i even have a youtube video) of closing and re-opening the datalog window while data is playing causes the datalog display to go blank? i can't reproduce it on my machine or seem to find a cause...
... also any feature requests or anything? i hate to push out a release for three bug fixes...
Bookmarks