It's not even a 225, it's a 198 Fireball, just too damn cool to throw out. I checked my gear ratio chart and the highest RPM I used was 4000 to get 82 mph, which it will never see with this nut behind the wheel. I'm going to try to use two ign modules and 1 HEI coil and see if it will work. Do you think I'll have a dwell issue? I thought dwell was adjust in respect to fuel burn time in each Cyl rather than when the Cyl burns it(odd fire). The Odd fire HEI distributor didn't have any provision for adjusting the dwell,(outside of the initial setting). Please shed some light on this. While reading in the MsPro manual I found a very good explaination of IAC stepper motor operation, I understand the 4 wire system now.
Bookmarks