Good morning gents: Can someone help please? I have been trying to get my Windows 7 SP1 to connect to a 1227730 ECM for months now, with no success. I have found a Device Driver that worked previously but Windows won't allow it to be installed, now, on my replacement computer. The driver #2.01.0 is windows signed, but not Certified. The driver comes with my GQ USB Programmer and is the only one out of all of the drivers that I have tried that worked. I tried at least a dozen different drivers. All I want to do is some Data Logging on my registered TunerPro RT V5. Windows Service Pack 1 refuses to recognize this driver. When I used it previously, on the original computer, service pack 1 was not installed. By eliminating all of the drivers, windows gave me the option of installing the un-certified driver along with all of the "are you sure" warnings. All I wanted to do was change my 19# injectors for 30# injectors and do a new tune on my Hot rod. Please help me solve the problem. Turbo
NOTE: all my cables and connections pass all of the tests (Realterm, ALDL test, TunerPro, Data Master, etc.) It gets to "Connecting" but never connects. Data Master dosen't see the ecm.
Bookmarks