Yes, you can send them the whole computer, and they will solder in a socket and test it. They used to charge around 30 bucks, maybe more now, I'm sure.
Yes, you can send them the whole computer, and they will solder in a socket and test it. They used to charge around 30 bucks, maybe more now, I'm sure.
That's what I did, sent it to Moates. hopefully this cures the issue when I get it back.
That's what I did, sent it to Moates. Hopefully this cures the issue when I get it back. $68 for the socket, install, and shipping; not too shabby.
What socket is Moates installing? Modified 28 pin ZIF, so you can use a 27SF512 Flash Chip (EEPROM)? Standard 24 pin DIP socket? Are you able to Burn 2732a EPROM's? The Moates.net Burn 2 DOES NOT Burn 2732a EPROM's.
dave w
I think it's called an E3? They said it will work with a burn 2 and the chips I'm using. The chips were burning fine, just couldn't get them to read.Originally Posted by dave w
Maybe this is what Moates is doing for you? http://support.moates.net/g2-adapter-installation/
dave w
Yeah, I believe so. Cant understand why we couldn't get that ZIF to work; everything read OK with an ohmmeter but I couldn't get it to read a burned or a factory chip. Hopefully this works.
Posting Permissions
Reply With Quote
Bookmarks