Unfortunately didn't have the option to do it that way thanks to a "cryptowall" virus.
I had planned to just go back with win7 but guru suggested going ahead and upgrading since I needed the new hard drive anyway and nothing could be saved.
Unfortunately didn't have the option to do it that way thanks to a "cryptowall" virus.
I had planned to just go back with win7 but guru suggested going ahead and upgrading since I needed the new hard drive anyway and nothing could be saved.
Any updates related to using WinFlash via Win 10?
FYI: Just did a flawless flash with WinFlash via Win 10
My laptop already had WinFlash on it when I did one of those free Win 10 upgrades..no problem at all during the flash.
I'll give it a ry on the bench flasher tomorrow. Im awaiting support from TC on an issue for my VM but i am afraid to try anything outside of XP OS as I too have seen ecms brick on other OS.
I have an extra pcm with DIP sockets so if it bricks, just reflash the chips and try again. That's how I determined my ALDL cable was bad, used another cable and Win 10 flashed nicely.
was doing some bench flashing with TC2 and Win10 so far no failures even with a full flash.
If your having problems with missing OCX files on win7 or win10 (or I would assume win8.x too) put the attached OCX files in the documented locations (different for 32 and 64 bit OS) and run the regsvr32 commands from the readme in a command prompt with admin access.
Posting Permissions
Reply With Quote
Bookmarks