Has anyone using TCII upgraded to windows 10 yet?

[dave w]

Just checked Efilive,hptuners and winflash. All of them worked and pulled files from my bench harness with a random 0411 just fine.

I just updated a Win 7 laptop to Win 10 by setting Win 7 to factory defaults, then upgraded to Win 10. So far I've only edited TCII .cal files. I will soon try WinFlash and report back.

dave w

[Playtoy_18]

Unfortunately didn't have the option to do it that way thanks to a "cryptowall" virus.
I had planned to just go back with win7 but guru suggested going ahead and upgrading since I needed the new hard drive anyway and nothing could be saved.

[EDZIP]

Any updates related to using WinFlash via Win 10?

[EDZIP]

FYI: Just did a flawless flash with WinFlash via Win 10

My laptop already had WinFlash on it when I did one of those free Win 10 upgrades..no problem at all during the flash.

[freshda9]

I'll give it a ry on the bench flasher tomorrow. Im awaiting support from TC on an issue for my VM but i am afraid to try anything outside of XP OS as I too have seen ecms brick on other OS.

[EDZIP]

I have an extra pcm with DIP sockets so if it bricks, just reflash the chips and try again. That's how I determined my ALDL cable was bad, used another cable and Win 10 flashed nicely.

[freshda9]

was doing some bench flashing with TC2 and Win10 so far no failures even with a full flash.