TunerPro starter Tutorial! New users this is a must read! :-)

[EagleMark]

Common problems with TunerPro USB connections and no data. Read this from Moates.
http://www.gearhead-efi.com/Fuel-Inj...ro-Tuning-Talk

Common problems with glitchy jumping data with TunerPro V5 and Imported TPV4 ADS file to TPV5 ADX file from Moates.
http://support.moates.net/2011/06/05/tprtv5-ads-to-adx/

[one92rs]

do you have to have a cable and be hooked to an ecm to be able to read files? i have downloaded the tunerprort and am wanting to just read files on this site to get a feel for it.

[EagleMark]

Nope load them up, find your bin or a bin and look around. Can also look around data side as well but of course won't see data till your hooked up.

[one92rs]

ok still trying to figure that part out.

[EagleMark]

Gotta be more specific then that... It will also help me remember when I started and maybe I can add to the starter post above.

[one92rs]

well i downloaded the program. i came on here and downloaded some bin files for the 427 mask to look at it since that is what i am going with. when i go to the downloaded bin and double click it it opens tunerpro but there is nothing in it. i dont see anything like it did not load. it says it is there at the top. but i am unable to see anything. i think i have clicked on just about every button there.

[EagleMark]

You also need the mask/XDF to read the bin/chip.

2. MASK: .xdf file extension. TunerPro still open, XDF, select your xdf you downloaded and saved, now your mask is loaded in TunerPro. You can now make changes to your chip/bin file.

Then if you don't see the Paremeter Tree click View, Paremeter tree and then open up Scalers, Flags and Tables.