I now it lists the codes in the live data and shows if one is set or not but if you tap on it nothing happens you just get a beep. I have no idea how to change an ADX file.
I now it lists the codes in the live data and shows if one is set or not but if you tap on it nothing happens you just get a beep. I have no idea how to change an ADX file.
@eutu1960: What is the vehicle?
1990 Corvette Auto L98
@eutu1960: The 1990 Corvette supports mode 10, reset. The adx files I know support a few commands, connect, monitor, disconnect, pause and unpause, but not a reset that I am aware of. I'm not an expert, but we could try to stuff the reset command in the pause or unpause command and see if that works. Alternatively, we could just write a reset adx too. I can do that for you if you like. Let me know and I will mess with it over the weekend.
@eutu1960: Try this adx file. Connect, then disconnect.
OK thanks I will give it a try as soon as I have a chance. Thank You
1320_john, it worked thanks, its much easier than jumping the wires.
The data I am reading is different than the reading I am getting with a timing light, base timing is set at 6 degrees with EST wire disconnected,
All following readings are with EST wire connected.
Idle: 7 degrees
2000 rpm:14 degrees
3000 rpm:15.5 degrees.
That is way off from what the my data logs shows.
Data Log at Idle is 24.61 degrees
Data Log at 2000 rpm is 52.73
Data Log at 3000 rpm is 49.57
I also have a code 42, so far test are pointing to the ECM, I replaced the Ignition Control Module with a known good one.
Here is a link to the data log. https://drive.google.com/file/d/0B5d...ew?usp=sharing
ALDLdroid author, Android application for ALDL ECU
https://play.google.com/store/apps/d...roux.aldldroid
Like us on Facebook
Visit the app's Website
Fixed code 42, it was a short in the distributor.
Been reading through some of this, and want to get this just have a couple questions. First if I purchase this off Google play I'm assuming I can use it on multiple devices as long as I sign on to Google. Not sure how long I will have this tablet and to make sure I can use it on my new device without repurchasing. Other question is can I send my data logs from this ap over to Tuner Pro if I want to do my programming and burning there.
All the licensing is handled by Google so yes, as long as you're using the same Google account, you can use the app on multiple devices without having to pay again. The app logs in both XDL and CSV format so TunerPro will be able to read datalog files created by ALDLdroid.
ALDLdroid author, Android application for ALDL ECU
https://play.google.com/store/apps/d...roux.aldldroid
Like us on Facebook
Visit the app's Website
Nice, thank you. Does anyone know if I can get the otg cable from best buy, radio shack, or something similar.
I bought my first one at The Source (Basically Radio Shack in Canada). You can find them at many places that sell phone accessories.
The man who says something is impossible, is usually interrupted by the man doing it.
Bookmarks