I have a question about BLM at idle. I've ran several logs and corrected the fuel table numerous times, but it seems at the end of every log when I let the truck idle, it goes crazy rich and the BLM drops down to 110-112. Here is a example of a log I just ran. The other day I got everything down to with +/- 4 blm, then today I ran another log and adjusted some more, most were from 127-131. So I ran a second log today and the idle is just horrible with the BLM. Also, is there a way to smooth out the idle? My cam should idle silk smooth but it feels like its a 230@.050 duration cam. It literally shakes the whole truck at an idle, open and closed loop, the idle is crap. One thing I didn't do is lower the timing at an idle, its close to 30, but when it was at 25 and even 20, it wasn't a whole lot better, if at all.
From what I've understood, perhaps this is incorrect, the idle VE table needs to be blended in the with off idle VE table...right? If anyone has any free time and gets a chance to look and could offer some advice, I greatly appreciate it.
BLG
Bookmarks