Quote Originally Posted by DanofMostTrades View Post
Ok guys, I've been hard at work getting this motor ready, trying to weed out every problem I can before installing it. As of last night it is in the truck and almost ready to go. I'm now in need of a starter bin to go on my Ostrich 2.0. Here is my setup:

96-2000 4 bolt main vortec longblock bone stock.
Edelbrock performer RPM vortec intake. No egr.
Stock 350 tbi with the ultimate tbi mods, and AFR.
Stock injectors.
Upgraded fuel pump.
long tube headers, 1.5"prime to 2.5" collector. O2 in collector. True dual 2.5" exhaust no cats.
700r4 transmission and transfer case (4x4).
Running a 427 pcm from a 95 350 auto truck.(my truck is an '87)

My guess is it will make around 270-280HP. Does anyone have a similar build that would be willing to share they're bin? I'm new to tuning and would like to have a good starting point.
Thanks in advance.
I think you are under estimating the HP. Iys more like 300-310 hp. You are going to need either larger injectors or alot more fuel pressure. I have a decen bin file I could dig up but you will need to increase your injector flow before it will ever run right.