A few issues im having is im lean at near idle app 900 rpm to 2000 at light throttle or decel .Mainly decel in second gear or higher .My blms go up to 150 on decel if I blip throttle even slightly it goes back 128 or richer but will decell until I stop at 130 to 150 .
When I try to raise near idle ve or off idle ve it goes leaner .Everything I have tried to get this lean spot to richen up hasn't worked .
Another issue I had was I seen with vortec tbi the adx responds well to initial timing set to 10 degrees for easier starting so I reset it from 0 to 10 and edited the adx but it is going closed loop in park when hot and it never did that prior .
It still stays closed loop at wot,
but when I put it in park at idle it will go open loop hot .I cant figure out why it doesn't go to open loop at WOT.
I can get the rich to go richer and leaner but the lean near idle and decel I just cant get a handle on .Would my aggressive timing table keep it lean no matter how much fuel I throw at it ?
I haven't figured out how to remove the pe /ae from export log yet .[Rookie]
Bookmarks