Because the MAF signal is being limited by the max airflow vs rpm table which happens to be 23 gm/sec at 400 rpm and below (0 rpm).
Because the MAF signal is being limited by the max airflow vs rpm table which happens to be 23 gm/sec at 400 rpm and below (0 rpm).
I have the same problem. I've gone through the troubleshooting flow chart and arrived at bad computer. Since i can see the wire glow red hot for a second after the engine is shut off, I know the burn-off is happening. It seems to me the computer is not detecting it. I'm thinking of purchasing a refurb computer from autozone and see if the swap eliminates it.
Has anybody else done this and seen the error code go away?
Posting Permissions
Reply With Quote
Bookmarks